Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1320

■Input data
Operand: (s1)
Device Symbol
+0 E1
+1
■Block memory
Operand: (d1)
Device Symbol
+0 BW
+1
+2 BB BB1
■Operation constant
Operand: (s2)
Device Symbol
+0 PN
+1 TRK
+2 SVPTN
11 PROCESS CONTROL INSTRUCTIONS
1318
11.3 Control Operation Instructions
Name Recommended range
Input value -999999 to 999999 [%]
Name Recommended range
Output value -999999 to 999999 [%]
Operation result
b15
0: |BW|<50%
1: |BW|50%
Name Recommended range
Operation mode 0: Reverse action
1: Direct action
Tracking bit 0: Tracking not performed
1: Tracking performed
Set value 0 to 3
pattern
b15
(1) Use of set value
Specify whether to use the set value (E2) or not.
0: Used
1: Not used
(2) Set value pattern
Specify whether to use the upper loop MV as the set value (E2) or
not.
0: E2 is the upper loop MV.
1: E2 is not the upper loop MV.
...
b0
...
b0
(2) (1)
Data type Standard Set by
value

Single-precision User/
real number system
Data type Standard Set by
value
Single-precision  System
real number

16-bit unsigned System
binary
Data type Standard Set by
value
16-bit unsigned 0 User
binary
16-bit unsigned 0 User
binary
16-bit unsigned 3 User
binary