Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1026

Processing details
• These instructions compare the band between the time data of lower limit value (s1) and the time data of upper limit value
(s2) with the time data (s3) to be compared, and according to the comparison result (below, within zone, or above), (d),
(d)+1, or (d)+2 is turned on.
X0
TZCP
(d)
Turns on when
(d)+1
Turns on when
(d)+2
Turns on when
Device
(s1), (s2), (s3)
(s1)+1, (s2)+1, (s3)+1
(s1)+2, (s2)+2, (s3)+2
Precautions
• Set (s1) to a value less than (s2). If (s1) is set to a value greater than (s2), (s2) is treated as the same value as (s1).
Operation error
Error code Description
(SD0)
3405H The value specified by (s1), (s2), or (s3) is outside the following range.
0 to 23
The value specified by (s1)+1, (s2)+1, (s3)+1, (s1)+2, (s2)+2, or (s3)+2 is outside the following range.
0 to 59
7 APPLICATION INSTRUCTIONS
1024
7.25 Clock Instructions
(s1) (s2) (s3) (d)
(s1) (s3)
(s1)+1 (s3)+1
>
(s1)+2 (s3)+2
(s1) (s3)
(s1)+1 (s3)+1
≤
(s1)+2 (s3)+2
(s3)
(s3)+1
(s3)+2
Clock data
Hour
Minute
Second
(s2)
(s2)+1
≤
(s2)+2
(s2)
(s2)+1
>
(s2)+2
Data range
0 to 23
0 to 59
0 to 59