Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1341

■Input data 1
Operand: (s1)
Position Symbol Name
+0 E1 Input value 1
+1
■Block memory
Operand: (d1)
Device Symbol Name
+0 BW Output value
+1
+2 BB BB1 Alarm
BB2 Output upper
limit alarm
BB3 Output lower
limit alarm
BB4 Output variation
rate alarm
■Operation constant
Operand: (s2)
Position Symbol Name
+0 NMAX Output
+1 conversion
upper limit
+2 NMIN Output
+3 conversion
lower limit
+4 TRK Tracking bit
+5 SVPTN Set value
pattern
Recommended range
-999999 to 999999 [%]
Recommended range
-999999 to 999999
...
b15
0: No alarm
1: Alarm
Recommended range
-999999 to 999999
-999999 to 999999
0: Tracking not performed
1: Tracking performed
...
b15 b4
(5)
(1) Input value selection (e1)
Specify whether to use E1 or E2 for the input value.
0: E1
1: E2
(2) Use of input value 1 (E1)
Specify whether to use the input value 1 (E1) or not.
0: Use
1: Not use
(3) Use of input value 2 (E2)
Specify whether to use the input value 2 (E2) or not.
0: Use
1: Not use
(4) Input value 1 (E1) pattern
Specify whether to use the upper loop MV as the input value 1
(E1) or not.
0: E1 is the upper loop MV.
1: E1 is not the upper loop MV.
(5) Input value 2 (E2) pattern
Specify whether to use the upper loop MV as the input value 2
(E2) or not.
0: E2 is the upper loop MV.
1: E2 is not the upper loop MV.
Data type
Single-precision
real number
Data type
Single-precision
real number
16-bit unsigned
b3 b2 b1 b0
binary
Data type
Single-precision
real number
Single-precision
real number
16-bit unsigned
binary
16-bit unsigned
b3 b2 b1 b0
binary
(4) (3) (2) (1)
11 PROCESS CONTROL INSTRUCTIONS
11.3 Control Operation Instructions
Standard Set by
value

User
11
Standard Set by
value

System
 System
Standard Set by
value
100.0 User
0.0 User
0 User
1EH User
1339