Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1624

Operand: (s)
Device Item
+12 Clock data
(Set only in an
abnormal state)
+13
+14
+15
+16 Error detection network
number
+17 Error-detected station
number
*1 A channel used only for the SINFTYRD and SINFSTRD instructions. The same channel used for the remote instructions (such as
REMFR and REMTO instructions) and the link dedicated instructions (such as the READ and SEND instructions) can be set.
Processing details
• These instructions read the model names of modules and units used in an intelligent device station, and store the data to
the device specified by (d1) and later.
Operand
(d1)+0 to (d1)+9
(d1)+10 to (d1)+19
(d1)+20 to (d1)+29
(d1)+30 to (d1)+39

(d1)+140 to (d1)+149
(d1)+150 to (d1)+159
(d1)+160 to (d1)+169
(d1)+170 to (d1)+179

(d1)+230 to (d1)+239
(d1)+240 to (d1)+249
(d1)+250 to (d1)+259
(d1)+260 to (d1)+269

(d1)+880 to (d1)+889
• The result of instruction execution is stored in the 1st word and a model name is stored in the 2nd to 10th words of each
item. The following table lists the values to be stored in the corresponding words.
Condition
The read target module or unit has a model name.
The read target module or unit does not have a model
name.
The read target slot is empty.
The read target module is being changed online.
*2 If the read target module has a hardware failure, -1 may be stored in the 1st word.
18 CC-LINK IE FIELD NETWORK INSTRUCTIONS
1622
18.5 Reading the Module Model Information of an Intelligent Device Station
Description
Upper 8 bits: Month (01H to 12H)
Lower 8 bits: Year (00H to 99H: Lower two digits of the year)
Upper 8 bits: Hour (00H to 23H)
Lower 8 bits: Day (01H to 31H)
Upper 8 bits: Second (00H to 59H)
Lower 8 bits: Minute (00H to 59H)
Upper 8 bits: Year (00H to 99H: Upper two digits of the year)
Lower 8 bits: Day of the week (00H (Sun.) to 06H (Sat.))
The network number of the station in which an error was detected is stored. (No
information is stored if an error is detected in the own station.)
• 1 to 239 (Network number)
The number of the station where an error was detected is stored. (No information is
stored if an error is detected in the own station.)
• 125: Master station
• 1 to 120: Local station, intelligent device station, submaster station
1st word
0
1
*2
-1
Item
Main base unit: power supply information 1
Main base unit: power supply information 2
1st extension base unit: power supply information 1
1st extension base unit: power supply information 2

7th extension base unit: power supply information 1
7th extension base unit: power supply information 2
Main base unit information
1st extension base unit information

7th extension base unit information
CPU slot: product information
I/O slot 0: product information
I/O slot 1: product information

I/O slot 63: product information
2nd to 10th words
Model name held by a module or a unit
Character string consisting of module type and the
number of points
0000H
Setting range Set by

System
 System

System

System

System

System