Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1249

■Input data
Operand: (s1)
Position Symbol Name
+0 E1 Input value
+1
■Block memory
Operand: (d1)
Position Symbol Name
+0 BW Output value
+1
+2 BB BB1 Alarm
BB2 Large deviation
alarm
BB3 Output upper
limit alarm
BB4 Output lower
limit alarm
BB5 Output variation
rate alarm
■Operation constant
Operand: (s2)
Position Symbol Name
+0 MTD Derivative gain
+1
+2 DVLS Large deviation
+3 alarm hysteresis
+4 PN Operation mode
+5 TRK Tracking bit
+6 SVPTN Set value
pattern
+7 NMAX Output
+8 conversion
upper limit
+9 NMIN Output
+10 conversion
lower limit
Recommended range
-999999 to 999999 [%]
Recommended range
-999999 to 999999
...
b15 b4
0: No alarm
1: Alarm
Recommended range
0 to 999999
0 to 100 [%]
0: Reverse action
1: Direct action
0: Tracking not performed
1: Tracking performed
0 to 3
...
b15
(1) Use of set value
Specify whether to use the set value (E2) or not.
0: Used
1: Not used
(2) Set value pattern
Specify whether to use the upper loop MV as the set value (E2) or
not.
0: E2 is the upper loop MV.
1: E2 is not the upper loop MV.
-999999 to 999999
-999999 to 999999
Data type
Single-precision
real number
Data type
Single-precision
real number
16-bit unsigned
b3 b2 b1
b0
binary
Data type
Single-precision
real number
Single-precision
real number
16-bit unsigned
binary
16-bit unsigned
binary
16-bit unsigned
binary
b0
(2) (1)
Single-precision
real number
Single-precision
real number
11 PROCESS CONTROL INSTRUCTIONS
11.3 Control Operation Instructions
Standard Set by
value

User
11
Standard Set by
value

System
 System
Standard Set by
value
8.0 User
2.0 User
0 User
0 User
3 User
100.0 User
0.0 User
1247