Chapter 18 Cc-Link Ie Field Network Instructions; Reading Data From The Intelligent Device Station/Remote Device Station (16-Bit Address Specified) - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

18
CC-LINK IE FIELD NETWORK INSTRUCTIONS
This chapter describes the instructions used commonly by MELSEC iQ-R series modules. For the instructions
when MELSEC-Q series modules are used, refer to the manuals for each module used and create programs.
For precautions when using modules, refer to the following.
 MELSEC iQ-R Module Configuration Manual
18.1
Reading Data from the Intelligent Device Station/
Remote Device Station (16-bit Address Specified)
JP.REMFR, ZP.REMFR
RnPCPU
RnCPU RnENCPU
(Process)
These instructions read data from the buffer memory area of the intelligent device station or the remote device station (in units
of words, 16-bit address specified).
Ladder
(J)
FBD/LD
EN ENO
J d1
s1 d2
s2
s3
s4
n
■Execution condition
Instruction
JP.REMFR
ZP.REMFR
18 CC-LINK IE FIELD NETWORK INSTRUCTIONS
1600

18.1 Reading Data from the Intelligent Device Station/Remote Device Station (16-bit Address Specified)

RnPCPU RnSFCPU RnSFCPU
(Redundant) (Standard) (Safety)
(s1) (s2) (s3) (s4) (d1)
Execution condition
ST
ENO:=JP_REMFR(EN,J,s1,s2,s3,s4,n,d1,d2);
ENO:=ZP_REMFR(EN,J,s1,s2,s3,s4,n,d1,d2);
(n) (d2)