Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1501

Processing details
• These instructions read the receive data of the target station sent to (s)+2 (own station storage channel) of control data.
• For the target stations that can be specified, refer to the following.
Page 1449 Target networks and target station types
• The SEND instruction is executed to send data. The data received from the sending station is stored in the own station
channel specified by the sending station, and the interrupt program with the interrupt number specified by the engineering
tool starts. The RECVS instruction is used in this interrupt program to read receive data.
[Own station]
CPU module
(d1)
RECVS
CH: Channel
[Sending station]
Network module CPU module
CH1
·
CHn
·
Network module
CH1
SEND
·
CHn
·
15 NETWORK COMMON INSTRUCTIONS
15.1 Link Dedicated Instructions
15
1499