Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1668

• After completion of the G(P).RLPASET instruction, turn on SB0003, a refresh instruction that is used for parameter change
with the dedicated instruction, to start the cyclic data refresh.
• If no stations are faulty
Sequence scan
Data link stop
Own station data link status
(X01)
Refresh instruction when changing
parameters by the dedicated
instruction (SB0003)
Data link stop
(SB0002)
Data link stop completion
(SB0045)
G(P).PLPASET instruction
Completion device (d)
Completion status
indication device (d)+1
• If all stations are faulty
Sequence scan
Data link stop
Own station data link status
(X01)
Refresh instruction when changing
parameters by the dedicated
instruction (SB0003)
Data link stop
(SB0002)
Data link stop completion
(SB0045)
G(P).PLPASET instruction
Completion device (d)
Completion status
indication device (d)+1
Precautions
• Two or more G(P).RLPASET instructions cannot be executed concurrently.
• The G(P).RLPASET instruction is not available in a system containing a standby master station.
• Do not set network parameters using the engineering tool for modules for which network parameters are set using the
G(P).RLPASET instruction. If the G(P).RLPASET instruction is executed for a module for which network parameters are set
using the engineering tool, the instruction will be terminated with an error and the network parameter settings are not
reflected.
• Stop the data link using "Data Link Stop" (SB0002) before executing the G(P).RLPASET instruction.
Operation error
Error code Description
((s1)+0)
 MELSEC iQ-R CC-Link System Master/Local Module User's Manual (Application)
B000H to BFFFH
19 CC-LINK INSTRUCTIONS
1666
19.7 Setting Network Parameters
END 0 END 0
Refresh stop
END 0 END 0
Refresh stop
END 0 END 0
Data link start
Completion of
the instruction
ON
ON Completed with an error
Completed successfully
END 0 END 0
Return processing
Completion of
the instruction
ON
ON Completed with an error
Completed successfully
1 scan
END 0 END
Refresh start
OFF
OFF
1 scan
END 0 END 0
Data link start
OFF
OFF
Modules
return
to the system.
0 END 0
END 0
Refresh start