Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1641

■Applicable devices
Operand Bit
X, Y, M, L, SM,
F, B, SB, FX,
FY
(J/U) J(P).SL 
MPRE
Q

G(P).S
LMPRE
Q
(s1) 

(s2)
(d1) 
*1

(d2)
*1 FX and FY cannot be used.
*2 FD cannot be used.
*3 T, ST, C, and FD cannot be used.
■Control data
Operand: (s1)
Device Item
+0 Error completion type
+1 Completion status
+2 Not used
+3 Request destination
module I/O number
+4 Request destination
network number
+5 Request destination
station number
+6 Not used
+7 Number of resends
+8 Arrival monitoring time
+9 Request data length
+10 Response data length
Word
J\ T, ST, C, D, W, U\G, J\,
SD, SW, FD, R, U3E\(H)G
ZR, RD
  
  
*2
  
*2
  
*2
  
*3
  
Description
...
b15 b7
0 (1)
(1)Error completion type (bit 7)
Specify whether to set clock data when completed with an error.
• 0: Clock data at error occurrence is not stored in (s1)+12 and later.
• 1: Clock data at error occurrence is stored in (s1)+12 and later.
The instruction completion status is stored.
• 0: Normal
• Other than 0: Error (error code)

Specify an access target module.
• 03FFH: Fixed
Specify an access target network number.
• 1 to 239: Network number
Specify an access target station number.
• 1 to 120: Local station, intelligent device station, remote device station,
submaster station
• 125: Master station
• 126: Master operating station

■Before instruction execution
Specify the number of resends to be performed if the instruction is not completed
within the monitoring time specified by (s1)+8.
• 0 to 15 (times)
■At completion of instruction
The number of resends performed (result) is stored.
• 0 to 15 (times)
Specify the monitoring time until completion of processing. If processing is not
completed within the monitoring time, the request is resent by the number of
resends specified in (s1)+7.
• 0: 10s
• 1 to 32767: 1 to 32767s
Specify the data size of the request data to be specified by (s2) in bytes.
The request data includes (s2)+0 (not used).
The data size of the response data to be stored in (d1) is stored in bytes.
The response data includes (d1)+0 (end code).
Double word Indirect
specification
Z LT, LST, LZ
LC
   
   
   
   
   
   
...
b0
0
18 CC-LINK IE FIELD NETWORK INSTRUCTIONS
18.9 Sending an SLMP Frame
Constant Others
K, H E $ J U
    
    
    
    
    
    
Setting range Set by
0000H User
0080H

System
 
03FFH User
1 to 239 User
1 to 120, 125, 126 User
 
0 to 15 User/
system
0 to 32767 User
6 to 1964 User
 System
1639
18