Registering/Canceling The Programmable Controller Cpu Monitoring - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

20.11
Registering/Canceling the Programmable
Controller CPU Monitoring
ZP.CSET
RnPCPU RnPCPU
RnCPU RnENCPU
(Process) (Redundant)
This instruction performs programmable controller CPU monitoring registration to enable use of the programmable controller
CPU monitoring function, or cancels it.
Ladder
(U) (s1) (s2)
FBD/LD
EN ENO
U d1
s1 d2
s2
■Execution condition
Instruction
ZP.CSET
Setting data
■Description, range, data type
Operand Description
(U) Start I/O number (first three digits in four-digit hexadecimal
representation) of a module
(s1) Channel number of the channel for which to send the
monitoring result
• 1: Channel (CH1 side)
• 2: Channel (CH2 side)
(s2) Start device where control data is stored
(d1) Dummy
(d2) Device that turns on for one scan upon completion of the
instruction
When the instruction completes with an error, (d2)+1 also
turns on.
EN Execution condition
ENO Execution result
*1 When specifying setting data by using a label, define an array to secure enough operation area and specify an element of the array
label.
RnSFCPU RnSFCPU
(Standard) (Safety)
(d1) (d2)
Execution condition

20.11 Registering/Canceling the Programmable Controller CPU Monitoring

ST
ENO:=ZP_CSET(EN,U,s1,s2,d1,d2);
Range Data type
00H to FEH String
1, 2 16-bit unsigned binary
Refer to the control data. Device name
 Device name

Bit
 Bit

Bit
20 SERIAL COMMUNICATION INSTRUCTIONS
20
Data type (label)
ANY16_OR_STRING_
SINGLE
ANY16
*1
ANY16
ANY16
ANYBIT_ARRAY
(Number of elements: 2)
BOOL
BOOL
1705