Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1257

■Input data
Operand: (s1)
Position Symbol Name
+0 E1 Input value
+1
■Block memory
Operand: (d1)
Position Symbol Name
+0 BW Output value
+1 (MV)
+2 BB BB1 Large deviation
alarm
■Operation constant
Operand: (s2)
Position Symbol Name
+0 DVLS Large deviation
+1 alarm
Hysteresis
+2 PN Operation mode
+3 TRK Tracking bit
+4 SVPTN Set value
pattern
Recommended range
-999999 to 999999 [%]
Recommended range
-999999 to 999999 [%]
...
b15
0: No alarm
1: Alarm
Recommended range
0 to 100 [%]
0: Reverse action
1: Direct action
0: Tracking not performed
1: Tracking performed
0 to 3
...
b15
(1) Use of set value
Specify whether to use the set value (E2) or not.
0: Used
1: Not used
(2) Set value pattern
Specify whether to use the upper loop MV as the set value (E2) or
not.
0: E2 is the upper loop MV.
1: E2 is not the upper loop MV.
Data type
Single-precision
real number
Data type
Single-precision
real number
16-bit unsigned
b0
binary
Data type
Single-precision
real number
16-bit unsigned
binary
16-bit unsigned
binary
16-bit unsigned
binary
b0
(2) (1)
11 PROCESS CONTROL INSTRUCTIONS
11.3 Control Operation Instructions
Standard Set by
value

User
11
Standard Set by
value

System
 System
Standard Set by
value
2.0 User
0 User
0 User
3 User
1255