Activating A Step - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

Activating a step

SET [S/BL\S]
RnPCPU RnPCPU
RnCPU RnENCPU
(Process) (Redundant)
• The RnCPU and RnENCPU with firmware version "12" or later support this instruction. (Use an engineering tool with version "1.015R" or later.)
• The RnPCPU (process) with firmware version "03" or later supports these instructions. (Use an engineering tool with version "1.020W" or later.)
This instruction activates the specified step.
Ladder
(d)
FBD/LD
EN ENO
d
■Execution condition
Instruction
SET
Setting data
■Description, range, data type
Operand Description
(d) Step No. to be activated
(Set (on) target bit device number)
EN Execution condition
ENO Execution result
■Applicable devices
Operand Bit
X, Y, M, L, J\
SM, F, B, S,
SB, FX, FY
*1
(d)  
*1 Only S, BL\S can be used. The devices can be index modified.
RnSFCPU RnSFCPU
(Standard) (Safety)
Execution condition
Word
T, ST, C, D, W, U\G, J\,
SD, SW, FD, R, U3E\(H)G
ZR, RD
 
ST
ENO:=SET(EN,d);
Range Data type

Bit

Bit

Bit
Double word Indirect
Z LT, LST, LZ
LC
  
13 SFC PROGRAM INSTRUCTIONS
Data type (label)
ANY_BOOL
BOOL
BOOL
Constant Others
specification (BL\
K, H E $
S)
    
13.1 SFC Control Instructions
13
*1
1433