Sfc Dedicated Instruction; Creating A Dummy Transition Condition - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

13.2

SFC Dedicated Instruction

Creating a dummy transition condition

TRAN
RnPCPU RnPCPU
RnCPU RnENCPU
(Process) (Redundant)
• The RnCPU and RnENCPU with firmware version "12" or later support this instruction. (Use an engineering tool with version "1.015R" or later.)
• The RnPCPU (process) with firmware version "03" or later supports these instructions. (Use an engineering tool with version "1.020W" or later.)
This instruction is a dummy output which satisfies a transition condition.
Ladder
FBD/LD
s
For details on transitions, refer to the following.
 MELSEC iQ-R Programming Manual (Program Design)
RnSFCPU RnSFCPU
(Standard) (Safety)
ST
TRAN(s);
13 SFC PROGRAM INSTRUCTIONS
13.2 SFC Dedicated Instruction
13
1439