Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1784

■Applicable devices
Operand Bit
X, Y, M, L,
SM, F, B, SB,
FX, FY
(U) 

(s)
*1
(d) 
*1 FX and FY cannot be used.
*2 FD cannot be used.
*3 T, ST, C, and FD cannot be used.
■Control data
Operand: (s)
Device Item
+0 System area
+1 Completion status
+2 Record number
+3 to +7 System area
+8 to +23 File name
+24 to +31 System area
*1 Refer to the recipe file format. (MELSEC iQ-R High Speed Data Logger Module User's Manual(Application))
*2 Specify the recipe file name in ASCII code.
Processing details
• Specify the recipe file of the SD memory card and then write the data of the CPU module to the recipe file.
• A file from the RECIPE folder of the SD memory card can be specified as the recipe file.
• Normal/error completion of the Z(P).RCPWRITE instruction can be checked with the completion device (d) and the
completion status indication device (d)+1.
• Completion device (d)
This device turns on during END processing of the scan where the Z(P).RCPWRITE instruction completes, and turns off during the next END processing.
• Completion status indication device (d)+1
The completion device turns on or off depending on the completion status of the Z(P).RCPWRITE instruction.
When completed successfully: The device remains off.
When completed with an error: The device turns on during END processing of the scan where the Z(P).RCPWRITE instruction completes, and turns off during
the next END processing.
• The following figure shows how the Z(P).RCPWRITE instruction operates during execution.
0
Sequence scan
Z(P).RCPWRITE instruction
Completion device (d)
OFF
Completion status
OFF
indication device (d)+1
23 High Speed Data Logger Module Instructions
1782
23.1 File Access Instructions
Word
J\ T, ST, C, D, W,
SD, SW, FD,
R, ZR, RD
 
*2
 
*3
 
Description

The completion status is stored upon completion of the instruction.
• 0: Completed successfully
• Other than 0: Completed with an error (error code)
Record number of data to be written

Specifies the recipe name in which the data of the CPU module is written.
characters)

END 0 END
Execution of Completion of
the instruction the instruction
Double word
U\G, J\, Z LT, LST,
U3E\(H)G LC
  
  
  
*1
0 END 0 END 0
ON
OFF
Completed
ON with an error
OFF
Completed
successfully
1 scan
Indirect Constant
specification
LZ K, H E
  
  
  
Setting range


1 to 256

*2
(Up to 32 String

END
Others
(U)
$
  
  
  
Set by

System
User

User
