Juniper ACX1000 Configuration Manual page 788

ACX Series Universal Access Router Configuration Guide
Action
Meaning
730
From operational mode, run the
user@PCC# show path-computation-client active-pce
PCE PCE1
--------------------------------------------
General
IP address
Priority
PCE status
Session type
LSP provisioning allowed : On
LSP cleanup timer
PCE-mastership
Max unknown messages
Keepalives received
Keepalives sent
Dead timer
Elapsed as main current
Elapsed as main total
Unknown msgs/min rate
Session failures
Corrupted messages
Delegation timeout set
Delegation timeout in
Delegation failures
Connection down
Counters
PCReqs
PCReps
PCRpts
PCUpdates
PCCreates
Timers
Local Keepalive timer:
30 [s]
Remote Keepalive timer:
- [s]
Errors
PCErr-recv
PCErr-sent
PCE-PCC-NTFS
PCC-PCE-NTFS
The output displays information about the current active stateful PCE to which the PCC
is connected. The PCE status
between a PCE and PCC.
For PCE1, the status of the PCEP session is
PCEP session has been established with the PCC.
show path-computation-client active-pce detail
: 192.168.69.58
: 0
: PCE_STATE_UP
: PCE_TYPE_STATEFULACTIVE
: 30 [s]
: main
: 5
: 0
: 0
: 0 [s]
: 1 [s]
: 446380 [s]
: 0
: 2198
: 0
: 30
: 0 [s]
: 0
: 167092 [s]
Total: 0 last 5min: 0
Total: 0 last 5min: 0
Total: 5 last 5min: 5
Total: 0 last 5min: 0
Total: 1 last 5min: 1
30 [s] Dead timer:
0 [s] Dead timer:
output field indicates the current status of the PCEP session
PCE_STATE_UP
command.
last hour: 0
last hour: 0
last hour: 5
last hour: 0
last hour: 1
120 [s] LSP cleanup timer:
0 [s] LSP cleanup timer:
, which indicates that the
Copyright © 2017, Juniper Networks, Inc.