Juniper ACX1000 Configuration Manual page 775

Purpose
Action
Copyright © 2017, Juniper Networks, Inc.
The statistics of indicate the number of messages sent by Router PCC to the PCE
PCRpts
to report the current status of LSPs. The
messages received by Router PCC from the PCE. The
PCE modified parameters for the PCE-controlled LSPs.
Verifying the PCE-Controlled LSP Status When LSP Control Is External
Verify the status of the PCE-controlled LSP from Router PCC to Router R2 when the LSP
is under external control.
From operational mode, run the
user@PCC> show mpls lsp name PCC-to-R2 extensive
Ingress LSP: 1 sessions
10.255.179.98
From: 10.255.183.59, State: Up, ActiveRoute: 0, LSPname: PCC-to-R2
ActivePath: to-R2-path (primary)
LSPtype: Externally controlled, Penultimate hop popping
LSP Control Status: Externally controlled
LoadBalance: Random
Encoding type: Packet, Switching type: Packet, GPID: IPv4
*Primary to-R2-path
Priorities: 3 3
Bandwidth: 8Mbps
SmartOptimizeTimer: 180
No computed ERO.
Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 10=SoftPreempt
20=Node-ID):
20.31.4.2 20.31.5.2
21 Mar 11 05:00:56.736 EXTCTRL LSP: Sent Path computation request and LSP
status
20 Mar 11 05:00:56.736 EXTCTRL_LSP: Computation request/lsp status contains:
bandwidth 10000000 priority - setup 4 hold 4 hops:
19 Mar 11 05:00:56.735 Selected as active path
18 Mar 11 05:00:56.734 EXTCTRL LSP: Sent Path computation request and LSP
status
17 Mar 11 05:00:56.734 EXTCTRL_LSP: Computation request/lsp status contains:
bandwidth 10000000 priority - setup 4 hold 4 hops:
16 Mar 11 05:00:56.734 Record Route:
15 Mar 11 05:00:56.734 Up
14 Mar 11 05:00:56.713 EXTCTRL LSP: Sent Path computation request and LSP
status
13 Mar 11 05:00:56.713 EXTCTRL_LSP: Computation request/lsp status contains:
bandwidth 10000000 priority - setup 4 hold 4 hops:
12 Mar 11 05:00:56.712 Originate Call
11 Mar 11 05:00:56.712 EXTCTRL_LSP: Received setup parameters :
20.31.5.2
10 Mar 11 05:00:49.283 EXTCTRL LSP: Sent Path computation request and LSP
status
9 Mar 11 05:00:49.283 EXTCTRL_LSP: Computation request/lsp status contains:
bandwidth 10000000 priority - setup 4 hold 4 hops:
8 Mar 11 05:00:20.581 EXTCTRL_LSP: Computation request/lsp status contains:
bandwidth 10000000 priority - setup 4 hold 4 hops:
7 Mar 11 05:00:20.581 EXTCTRL LSP: Sent Path computation request and LSP
status
6 Mar 11 05:00:20.581 EXTCTRL_LSP: Computation request/lsp status contains:
Chapter 23: Configuring Path Computation Element Protocol (PCEP)
statistics indicate the number of
PCUpdates
PCUpdates
show mpls lsp name PCC-to-R2 extensive
State: Up
20.31.4.2 20.31.5.2
messages include the
command.
20.31.1.2 20.31.2.2
20.31.1.2 20.31.2.2
20.31.1.2 20.31.2.2
20.31.4.2
20.31.1.2 20.31.2.2
20.31.1.2 20.31.2.2
717