Juniper ACX1000 Configuration Manual page 786

ACX Series Universal Access Router Configuration Guide
Purpose
Action
Meaning
728
pce PCE2 {
destination-ipv4-address 192.168.70.65;
destination-port 4189;
pce-group PCEGROUP;
}
If you are done configuring the device, enter
Verification
Confirm that the configuration is working properly.
Verifying PCC Status on page 728
Verifying PCE1 Status on page 729
Verifying the PCE-Initiated LSP Status When the LSP Is Externally
Provisioned on page 731
Verifying PCC Status
Verify the PCEP session status and LSP summary between the PCC and the connected
PCEs.
From operational mode, run the
user@PCC# show path-computation-client status
Session Type
PCE1 Stateful Active
PCE2 Stateful Active
LSP Summary
Total number of LSPs
Static LSPs
Externally controlled LSPs
Externally provisioned LSPs : 1/16000 (current/limit)
Orphaned LSPs
PCE1 (main)
Delegated
Externally provisioned : 1
PCE2
Delegated
Externally provisioned : 0
The output displays the status of the PCEP session between the active stateful PCEs
and the PCC. It also displays information about the different types of LSPs on the PCC,
and the number of LSPs provisioned by the connected PCEs and delegated to them.
PCE1 is the main active PCE and has one PCE-initiated LSP that has been automatically
delegated to it by the PCC.
from configuration mode.
commit
show path-computation-client status
: 1
: 0
: 0
: 0
: 1
: 0
command.
Provisioning Status
On Up
On Up
Copyright © 2017, Juniper Networks, Inc.