Replacing An Sfp Or Xfp Transceiver On An Mx480 Dpc, Mpc, Mic, Or Pic; Removing An Sfp Or Xfp Transceiver From An Mx480 Dpc, Mpc, Mic, Or Pic - Juniper MX480 Hardware Manual

Related
Documentation

Replacing an SFP or XFP Transceiver on an MX480 DPC, MPC, MIC, or PIC

Removing an SFP or XFP Transceiver from an MX480 DPC, MPC, MIC, or PIC

Copyright © 2011, Juniper Networks, Inc.
Issue the following CLI command:
user@host>request chassis fpc slot slot-number online
For more information about the command, see the
Services Command Reference
To bring a PIC online:
Press the PIC offline/online button until the PIC LED lights green. For a PIC installed
in an FPC2 or FPC3, use a narrow-ended tool that fits inside the opening that
leads to the button.
Issue the following CLI command:
user@host>request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see the
Services Command Reference
To bring a MIC online:
Press the MIC offline/online button until the MIC LED lights green.
Issue the following CLI command:
user@host>request chassis mic fpc-slot mpc-slot pic-slot mic-slot online
For more information about the command, see the
Services Command Reference
The normal functioning indicator LED confirms that the component is online. You can
also verify correct DPC or MPC functioning by issuing the
or correct MIC or the PIC functioning by issuing the
command.
Preventing Electrostatic Discharge Damage to an MX480 Router on page 232
Maintaining Cables That Connect to MX480 DPCs, MPCs, MICs, or PICs on page 130
Removing an SFP or XFP Transceiver from an MX480 DPC, MPC, MIC, or PIC on page 209
1.
Installing an SFP or XFP Transceiver into an MX480 DPC, MPC, MIC, or PIC on page 211
2.
Removing an SFP or XFP does not interrupt DPC, MPC, MIC, or PIC functioning, but the
removed SFP or XFP no longer receives or transmits data.
Chapter 14: Replacing MX480 Hardware Components
Junos OS System Basics and
.
Junos OS System Basics and
.
Junos OS System Basics and
.
show chassis fpc
show chassis fpc pic-status
command
209