New Patient
6.
To scan bar code on patient identification band, press
scan trigger on hand-held scanner.
•
If scan is successful, an audible tone sounds and
patient
appears on Main Display.
ID
•
If profile is configured in Authorized User Mode,
PANEL LOCKED
7.
To unlock panel, clinician's
NOTES:
Automatic display of Patient ID Entry screen should be
enabled in the System Configuration settings.
If the patient
ID
entered later.
Patient
may be entered manually using the PC Unit keypad
ID
(see PC Unit Section of this DFU).
When a questionable bar code is scanned at the main screen
and the panel is unlocked, a prompt to confirm the type of bar
code scanned appears. This occurs whether the Authorized
User Mode is enabled or disabled.
While Infusion is in Progress
To associate the PC Unit with a patient
screen is not shown:
1.
Attach hand-held scanner to connection port on Auto-ID
Module. Ensure secure circuit connection.
2.
To scan bar code on patient identification band, press
scan trigger on hand-held scanner.
•
If scan is successful, an audible tone sounds and
patient
appears on Main Display.
ID
NOTE:
Patient
may be entered manually using the PC Unit keypad
ID
(see PC Unit Section of this DFU).
6-4
Programming
Patient Identification (Continued)
(Continued)
screen appears.
must be scanned.
ID
is not entered at this time, it can still be
ID
when patient
ID
CAUTIONS
•
CLASS 1 LED PRODUCT
stare into the beam or allow beam
to strike patient's face.
• Always verify that information
displayed on the PC Unit matches
scanned data.
CAUTIONS
•
CLASS 1 LED PRODUCT
stare into the beam or allow beam
to strike patient's face.
• Always verify that information
displayed on the PC Unit matches
scanned data.
®
Alaris
System (with v9 Model 8000) DFU
Auto-ID Module Section
Scan Trigger
: Do not
: Do not