Associating the PC Unit with a patient provides a means of
identifying the module(s) that will deliver
particular patient.
To associate the PC Unit with a new patient
1.
Attach hand-held scanner to connection port on Auto-ID
Module. Ensure secure circuit connection.
2.
Power on PC Unit.
3.
To select New Patient?, press Yes soft key.
4.
To accept current profile, press Yes soft key.
OR
To proceed to profile selection screen, press No soft key.
5.
To accept profile selection, press
•
Patient ID Entry screen appears.
•
Green
READY LED
ready to scan.
®
Alaris
System (with v9 Model 8000) DFU
Auto-ID Module Section
Patient Identification
medications to that
IV
New Patient
ID
CONFIRM
illuminates, indicating system is
:
Use only the hand-held external
scanner supplied by Cardinal Health.
Using other accessories may
result in increased emissions or
decreased immunity of the Alaris
System.
soft key.
Ready to scan
indicator
Programming
WARNING
READY
SCAN
CANCEL
Programming
®
6-3