Attaching and Detaching Dose Request Cord
The Dose Request Cord must be attached to the PCA Module
when delivering a
PCA
infusion.
To attach Dose Request Cord:
•
Insert latching connector into Dose Request Cord
attachment. Red marking on latching connector should
be aligned with red marking on Dose Request Cord
attachment.
To detach Dose Request Cord:
•
Hold body of latching connector and pull straight away,
without twisting or turning, from Dose Request Cord
attachment.
3-2
Getting Started
dose or
+ continuous dose
PCA
WARNING
Carefully locate the Dose
Request Cord to reduce the
possibility of patient entanglement or
strangulation.
Red alignment marks
Latching Connector
®
Alaris
System (with v9 Model 8000) DFU
PCA Module Section
Dose Request
Cord Attachment