Table of Contents
Advertisement
Operator's Manual
3.
Mode Select Screen - Here the operator can select the desired mode of
operation. Once selected, the operator has the ability to adjust the screen
controls for the mode selected. Only the relevant controls available for the
selected mode are visible.
To make a change to a control, touch the control. Both the control and its
associated numeric display highlight and the adjust buttons appear. Press up
or down buttons to adjust the setting as desired. Confirm the change by
pressing the control again.
4.
Parameter Adjust Screen – During normal operation, active controls for the
current operating mode can be adjusted by touching the control, using the
increase or decrease arrows to make the adjustments and then pressing the
control again to confirm the change.
5.
Main screen– The Main Screen provides the operator with displays of current
mode of operation, alarm status, battery charge status, monitored parameters
and a pressure time graphic display. Active controls are available for
adjustment in this screen.
675-101-101
Revision H
Figure 10 – Mode Select Screen
Figure 11 – Parameter Adjust Screens
29
Advertisement
Table of Contents
