Camera Support; Preparing The Optical Impression - Sirona Cerec AC Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions for the Acquisition Unit Sirona Dental CAD/CAM System
63 33 582 D3492
D3492.201.01.09.23 09.2011
7.4

Camera support

Camera support
Using the camera support gives you the following advantages:
● You obtain acquisitions free of motion blurring.
● You avoid damage to the prism.
● You avoid touching the prepared tooth.
CAUTION
Using the camera support
Clean the camera support by wiping or spraying it with disinfectant prior
to use. Designed for one-time use only.
7.5

Preparing the optical impression

Preparing the optical impression
1. Push the camera support onto the camera as illustrated.
Pushing on the camera support
2. Position the camera over the teeth to be acquired.
Supporting the 3D camera
3. Support the camera with the front part of the camera support on a
tooth so that you can hold it quietly during the acquisition phase.
NOTICE
Powder on the surface of the prism
If the prism touches powdered surfaces, then powder usually remains
on the prism surface and generates dark spots in the image.
The powder can be wiped off from the prism with a soft cloth.
7 Operation
37