Technical Description; System Requirements; Cerec Mc Xl Basic; Cerec Mc Xl With Premium Package - Sirona CEREC MC XL Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions CEREC MC XL
61 46 885 D 3439
D 3439.201.02.19.02 12.2014
8

Technical description

8.1

System requirements

8.1.1

CEREC MC XL Basic

The CEREC SW must only be installed on CEREC AC acquisition units.
The hardware version of the acquisition unit must be PC Hardware HQ
with Windows 7 (64 bit) or higher.
If necessary, upgrade your operating system.
Units as of serial no. 126001 are equipped with new stepping motors. The
Fragment from serial no. 126001
milling units can only be used in conjunction with CEREC SW 4.0.2
software, inLab SW 4.0.2 or more recent versions.
8.1.2

CEREC MC XL with premium package

The CEREC SW/inLab software must only be installed on CEREC AC
acquisition units or on the 64-bit inLab PC (optional). The hardware
version must be PC Hardware HQ with Windows 7 (64 bit) or higher.
If necessary, upgrade your operating system.
Units as of serial no. 126001 are equipped with new stepping motors. The
Fragment from serial no. 126001
milling units can only be used in conjunction with CEREC SW 4.0.2
software, inLab SW 4.0.2 or more recent versions.
8.2

Grinding and milling unit

8.2.1

General technical description

● Digital feed control with force monitoring for extremely sensitive
Technical description of the grinding unit
processing of ceramic materials
● Process-controlled grinding motors
● Production repeatability:
● Grinding speed:
Grinding instruments (performance-monitored, backlash-free bearing)
● Grain size:
● Speed:
● Step Bur 12 S
● Step Bur 20 (only for CEREC MC XL with premium package)
● Cyl. Pointed Bur 12 S
● Cyl. Pointed Bur 20 (only for CEREC MC XL with premium package)
Fragment Milling instruments
8 Technical description
8.1 System requirements
+/- 25 μm
1.0 - 1.5 mm/min.
64 μm
42,000 rpm
61