Right-Click Anywhere On The Schematic Map And Select Move To; Target From The Resulting Pop-Up Menu, As Shown In - Agilent Technologies Nano Indenter G200 User Manual

Agilent Nano Indenter G200 User's Guide
Figure 6-76Nano Handset schematic map with center sample circled in
red

Right-click anywhere on the schematic map and select Move to

15

Target from the resulting pop-up menu, as shown in

Figure 6-77Select Move to Target from right-click menu
Visually confirm that the microscope is over the center sample disk
16
in the sample tray.
Commonly Used Procedures 6
Figure 6-67.
6-55