Test Flow Pane - Agilent Technologies Nano Indenter G200 User Manual

NOT E
Agilent Nano Indenter G200 User's Guide
•

Test Flow Pane

• Settings Pane
Test Flow Pane
To display the Test Flow pane, click the Test Flow tab
the left of the Explorer page.
Figure D-2Test Flow pane
This pane displays all test segments. Test segments are individual
commands that perform a test. A wide variety of test segments are
available. Some perform hardware functions, such as moving the G200
motion system. Other test segments perform software functions, such as
printing a report or calculating a formula. NanoSuite Explorer enables
you to add, delete, or modify any test segment.
The Test Flow pane displays the tree structure for the test flow. The
folders in the tree can be expanded or collapsed by clicking on the
plus/minus sign to the left of a folder. There are two levels in the tree, as
shown in Figure D-2: the folder level and test-segment level.
Most users work exclusively in the Test folder.
Click on a test segment to display its properties in the Settings pane. The
content of the Settings pane depends upon whether you are in Test Flow
view or Configuration view.
Settings pane.
NanoSuite Explorer D
Figure D-3 on page D-5 shows an example
(Figure D-2) at
D-4