Agilent Technologies Nano Indenter G200 User Manual page 164

NanoSuite 4
channels drop-down menu will fill with the available units of the
selected channel. Select the desired display units in this drop-down
menu.
Multiple Channels
To display multiple channels on an axis, select the Multiple Channels
checkbox. Only one axis can display multiple channels. If one axis has
the Multiple Channels option selected, then the Multiple Channels
checkbox for the other axis is disabled. Once the Multiple Channels
option has been selected, click the Select button to configure which
channels are displayed via the Configure Channels dialog box, as shown
in Figure 4-76.
Figure 4-76Configure Channels dialog box
The Available list shows all channels that have the correct unit class and
are not hidden. The Selected list shows all channels that will be
displayed on the review graph. To have a channel be displayed on the
review graph, use the Add > button or double-click the name of the
channel in the Available list. This will cause the channel to move from
the Available list to the Selected list.
To stop a channel from being displayed on the graph, use the < Remove
button or double-click the name of the channel in the Selected list. This
will cause the channel to move from the Selected list to the Available
list.
To add all available channels, click the Add All button (>>). To remove
all channels from the Selected list, click the Remove All button (<<).
Agilent Nano Indenter G200 User's Guide 4-72