Agilent Technologies Nano Indenter G200 User Manual page 41

Agilent Nano Indenter G200 User's Guide
Click on the center circle in the schematic map, circled in red in
5
Figure 2-27, which corresponds to the center (reference) sample in
the sample tray.
Figure 2-27Nano Handset schematic map with center sample circled in
red
Right-click anywhere on the schematic map and select Move to
6
Target from the resulting pop-up menu, as shown in
Figure 2-28Select Move to Target from right-click menu
Visually confirm that the microscope is over the center sample disk
7
in the sample tray. The microscope does not have to be directly over
the sample at this point.
Quick Start Guide 2
Figure 2-28.
2-22