Agilent Technologies Nano Indenter G200 User Manual page 409

Agilent Nano Indenter G200 User's Guide
The following checkboxes turn these features On (select) or Off (clear):
• Sample Level: Determines whether an input is sample-level
(selected) or test-level (cleared). A sample-level input has the same
value for every test within a sample. A test-level input can have a
different value for every test within a sample.
• Locked: Controls whether the input can be deleted. If this checkbox
is selected, then the input can be deleted only by someone with
Creator privileges.
Inputs Folder Right-Click Menu
In the Configuration view Settings Pane, there is a right-click menu for
the Inputs folder, as shown in
Figure D-54Right-click menu for Inputs folder in the Settings pane
Several of these commands are equivalent to those from the
Configuration pane right-click menu:
Add Input... is like Insert Input from the right-click menu of
Figure D-25 on page D-20.
The Result Order... command is equivalent to that from the
Tab" on page D-39 for Inputs
The Input Order... and Group Operations commands are not used.
Select Find... to open the Find dialog box to search for a term that
appears in the display name of an input. If the Internal Names checkbox
is selected, then the internal names will be searched instead of the
display names.
The Delete command deletes the selected input without placing the
input on the clipboard. The Cut command deletes the selected input and
places it on the clipboard. The Copy command copies the selected
NanoSuite Explorer D
Figure D-54.
Tabs.
"General
D-44