Agilent Technologies Nano Indenter G200 User Manual page 405

Agilent Nano Indenter G200 User's Guide
Figure D-49General tab for Inputs
The Display Name can be any combination of keyboard characters,
including spaces. You can change the display name as often as you
want.
The Units drop-down menu enables you to change the unit of
measurement for the selected unit class.
To modify the Units Class:
Click Units Class... to open the Units Selection dialog box. Select
1
the class from the Class drop-down menu.
This selection will determine the content for Type.
Select the type from the Type drop-down menu.
2
Click OK.
3
The Default Value parameter is either a drop-down menu or text box,
depending on the Choice List setting in the
page D-42. Adjust the Default Value to set the default value for the
input.
If the Default Value is a drop-down menu, then select a value from the
menu. Add values to the drop-down list by clicking Edit... and adding
values via the Create Default Values List dialog box, shown in
Figure D-50 on page D-41.
NanoSuite Explorer D
"Options Tab" on
D-40