Adjust The Height Of The Samples - Agilent Technologies Nano Indenter G200 User Manual

Quick Start Guide 2
Figure 2-22Slide sample tray into the motion system
Tighten the locking screw in the right sample tray retaining rail.
3

Adjust the Height of the Samples

The height of the sample in the center of the sample tray has been set by
CAUTION
the technician who installed the instrument. The center sample will be
the reference height for all other samples. The following procedure
assumes that the height of the sample in the center of the sample tray has
not been changed. Adjusting the height of the center sample requires
Agilent technical support.
Agilent Nano Indenter G200 User's Guide 2-19