Test Menu; Next Test Segment; Run Post-Sample - Agilent Technologies Nano Indenter G200 User Manual

Test Menu

Next Test Segment

Run Post-Sample

Agilent Nano Indenter G200 User's Guide
The Test menu is available on the
Test menu, shown in Figure
For quicker access to these functions, be familiar with the Stop button in
emergency situations, such as when you are concerned that a sample
may strike the tip.
Remember that lateral forces applied to the tip can cause serious
damage (see "System Controls"
Run, Stop, and Pause commands control a test.
Figure 4-19Test menu
A test is divided into segments. You can use this command to skip the
current segment and begin the next segment.
Selecting this command executes instructions that are defined to run
after all testing on a particular sample is complete.
Test Page and Review Page
4-19, is used to run, stop, and pause tests.
on page 4-57 for further details). The
NanoSuite 4
only. The
4-18