Review Graph Setup - Agilent Technologies Nano Indenter G200 User Manual

NanoSuite 4
Figure 4-75Review Graph Setup dialog box

Review Graph Setup

Scaling Tab
Using this tab, you can set the Y and X axis variables, the units they are
displayed in, and whether multiple channels are used, as shown in
Figure 4-75.
Axis Scale Selections
These controls allow the maximum value of an axis to be configured. If
the Auto checkbox is cleared, then you can enter the minimum and/or
maximum value that the axis should display. The value entered should
be in the units selected for the axis.
If the Auto checkbox is selected, then NanoSuite will automatically
select the minimum/maximum value of the axis such that the curve data
is always in view.
Axis Channel Selection
Select the channel to be displayed from the list of channels in the top
drop-down menu. This menu contains a list of all channels that are not
hidden. When a channel is selected, the drop-down menu below the
Agilent Nano Indenter G200 User's Guide 4-71