Agilent Technologies Nano Indenter G200 User Manual page 427

Agilent Nano Indenter G200 User's Guide
To perform a scratch test, you must open a method. All methods related
to scratch testing are in the Scratch folder from the Method menu, as
shown in Figure E-2.
Figure E-2Scratch folder in Open Method dialog box
If NanoSuite is not open, follow this procedure:
Launch NanoSuite.
1
At the User Login dialog box, select Agilent from the Name
2
drop-down menu.
Click OK.
3
When you are prompted to select a method in the Open Method dialog
box,
Select Scratch > G-Series Ramp Load Scratch from the Filename
4
drop-down menu as shown in
Click OK.
5
Scratch Testing E
Figure E-3 on page E-4.
E-3