Agilent Technologies Nano Indenter G200 User Manual page 349

Agilent Nano Indenter G200 User's Guide
Exit and restart NanoSuite.
9
Find the head-indicator icon on the
10
Confirm the head-indicator icon is set to XP highlighted in red as
11
shown in Figure B-11.
Figure B-11XP icon on Status Bar
Remove the locking pins. Test the pins to determine which one offers
12
the most resistance and remove that pin first.
Install the locking pins into their docking holes in the tip-change
13
tool.
Dynamic Contact Module II B
Status Bar in NanoSuite.
B-7