Tip-Change Tool
Tip-Retaining Nut
Agilent Nano Indenter G200 User's Guide
Figure3- 24Temperature probe for the G200
The tip-change tool
(Figure 3-
diamond
Indenter
tip. The tool is used to grip the diamond tip and the
tip-retaining nut.
Figure3- 25Tip-change tool
See
Indenter
and
Tip-Retaining
Chapter
6, "Commonly Used Procedures".
Shown in
Figure 3-
26, the tip-retaining nut is used to attach the tip to
the
Indenter
shaft.
Instrument Reference 3
25) is used for removal or insertion of the
Nut. Also see
Changing the Indenter
in
3-20