Agilent Technologies Nano Indenter G200 User Manual page 266

Agilent Nano Indenter G200 User's Guide
Right-click anywhere on the schematic map and select Move to
7
Target from the resulting pop-up menu, as shown in
Figure 6-67Select Move to Target from right-click menu
Right-click anywhere on the schematic map and select Nano Video
8
HandSet from the resulting pop-up menu, as shown in
Figure 6-68Select Nano Video Handset from right-click menu
Find a location on the sample that is free of contaminants and dust.
9
Click green GO button to initiate testing.
10
Allow testing to complete.
11
Access the frame stiffness and area function information by choosing
12
Tip > Configure Tip as shown in
Commonly Used Procedures 6
Figure
Figure
Figure 6-69 on page 6-48.
6-67.
6-68.
6-47