Agilent Technologies Nano Indenter G200 User Manual page 57

NOT E
Agilent Nano Indenter G200 User's Guide
If you are using a DCM, use a separation distance of 20 microns rather
than 50.
Click the Next Step button.
26
In the resulting dialog box, shown in
27
Figure 2-50Batch Setup dialog box
In the Batch Configuration dialog box
28
Batch.
Figure 2-51Save Batch, outlined in red, in the Batch Configuration
dialog box
This will open the Save Batch File dialog box.
Quick Start Guide 2
Figure 2-50, click No.
(Figure 2-51), click Save
2-38