Navigating The Nano Video Handset - Agilent Technologies Nano Indenter G200 User Manual

NanoSuite 4
Mode
This command is used to control the position of the tables relative to
either the indenter or the microscope. A red icon denotes the current
position (before move is initiated) and the dimmed icon denotes the
desired new position. A pyramid is the active icon in indenter mode,
whereas a cone is the active icon in microscope mode. Typically, you
will use the microscope mode exclusively.
Templates
As shown in Figure 4-52, use the Templates submenu to toggle the
handset between the templates installed on your system. Templates are
consistent with the configuration of hardware you have purchased for
your system. Other templates may be available, depending upon system
configuration.
Figure 4-52Template menu
The Microscope to Template Calibration and Reset Microscope to
NOT E
Template Values commands should not be used without consulting
Agilent technical support.
Grid
Use the Grid command to place or remove gridlines. Clicking the
command will toggle the setting, designated by a checkmark.

Navigating the Nano Video HandSet

While in the Nano Video HandSet mode, clicking anywhere on the
video image centers the area that you clicked on in the HandSet area.
Agilent Nano Indenter G200 User's Guide 4-49