Configure Tip - Agilent Technologies Nano Indenter G200 User Manual

Configure Tip

Agilent Nano Indenter G200 User's Guide
This command enables you to add or remove tips and change their
parameters via the Configure Tip Parameters dialog box shown in
Figure 4-35.
Highlight the parameter in question and type in the new parameter
1
value.
Click OK to open a confirmation box.
2
Click OK to continue with your configuration changes.
3
NanoSuite will re-analyze the data for the current sample using the new
tip configuration.
Figure 4-35Configure Tip Parameters dialog box
NanoSuite 4
4-32