Agilent Technologies Nano Indenter G200 User Manual page 162

NanoSuite 4
Reset Graph Filter
This command resets the Graph to the original unfiltered data and the
Results Panel to the original unfiltered calculations.
Filter Help
This command opens a Graph Filter Help screen.
Y-Axis Channel
This submenu contains all of the defined channels for the current test
method. Selecting one of these channels shows that channel on the Y
axis of the graph.
Y-Axis Units
This submenu contains different units of measurement for the Y axis.
X-Axis Channel
This submenu contains all of the defined channels for the current test
method. Selecting one of these channels shows that channel on the X
axis of the graph.
X-Axis Units
This submenu contains different units of measurement for the X axis.
Properties
This command enables you to change scaling, appearance, styles, lines,
and zoom to regions via the Review Graph Setup dialog box, as shown
in Figure 4-75 on page 4-71.
Agilent Nano Indenter G200 User's Guide 4-70