Agilent Technologies Nano Indenter G200 User Manual page 53

Agilent Nano Indenter G200 User's Guide
Click on the center circle in the schematic map, circled in red in
18
Figure 2-42, which corresponds to the center (reference) sample in
the sample tray.
Figure 2-42Nano Handset schematic map with center sample circled in
red
Right-click anywhere on the schematic map and select Move to
19
Target from the resulting pop-up menu, as shown in
Figure 2-43Select Move to Target from right-click menu
The X/Y positioning table should then move to the proper location
under the microscope and the red cone on the schematic map should
move toward the target. Once the cone reaches the target, it turns green.
Quick Start Guide 2
Figure 2-43.
2-34