3D Tab - Agilent Technologies Nano Indenter G200 User Manual

3D Tab

Agilent Nano Indenter G200 User's Guide
NanoSuite now handles 3D images in a new way. Previously, the 3D
images were treated much like the 2D graph in which you selected a test
to graph.
However, this limited the 3D images to one image per test. The new data
handling allows you to create an endless number of 3D images with
advanced image manipulations. The 3D tab generates a default 3D
image of Scan Displacement as shown in
.
Figure 4-86I3D Review Graph Panel
The user can generate additional images by right-clicking on the legend
to the left of the 3D window. This will bring up the following Add
Graph dialog box in Figure
Figure 4-87Add New 3D Graph
Figure 4-86
4-87.
NanoSuite 4
4-82