Exercise 3 - Agilent Technologies Nano Indenter G200 User Manual

Exercise 3

Agilent Nano Indenter G200 User's Guide
Figure D-66Graph zoomed to show Real Strain Rate data
Choose File > Save Sample As....
54
Append the existing filename with -mod.
55
Click Save.
56
Leave NanoSuite open for the next exercise.
57
In this exercise, you will import data from a previously tested sample
and analyze the data with this new method and its new calculations.
Select New Sample from the File menu.
1
If you are prompted to save changes, click Yes.
2
Choose File > Import... > From NanoSuite Sample.
3
In the Import from NanoSuite dialog box, select the file Training >
4
Thin Film 1 from the Select Sample drop-down menu.
Click the Select All button to select all samples for importing.
5
Click OK.
6
Click the Review tab to reveal the Review page.
7
Right-click on the graph and select Y-Axis Channel > Real Strain
8
Rate (1/s) from the resulting pop-up menu.
Right-click in the Legend pane and select Select all Tests from the
9
resulting pop-up menu.
NanoSuite Explorer D
D-54