Agilent Technologies Nano Indenter G200 User Manual page 132

Open Method
Save Method
Batch Mode
Individual Mode
Configure Real
Time Graph
Edit Memo
Log In
Log Out
Exit
Agilent Nano Indenter G200 User's Guide
This icon will open a previously installed method.
Use this icon to save a method after it is defined (for later use).
Use this icon to switch to batch mode.
Use this icon to switch to individual mode. It only runs tests of
individual specimens. It does not perform batches of tests on a
specimen.
Use this icon to change the Real Time Graph settings.
Use this icon to create or edit a Sample memo. Use it to store
comments about how the tests were run or how the specimen
performed. Memos may be included within sample reports.
Use this icon to select the user profile.
Use this icon to log out of the selected user profile.
Use this icon to exit the software.
NanoSuite 4
4-40