Agilent Technologies Nano Indenter G200 User Manual page 62

Agilent Nano Indenter G200 User's Guide
Reviewing Data from the First Batch
You have just completed the first batch in which you performed a series
of four tests on fused silica. Now, review the results.
Click the Review tab, shown in
1
Figure 2-58Review tab
In the left panel, right-click and select Select All Tests from the
2
pop-up menu, as shown in
Figure 2-59Select all Tests on right-click menu
The Review Graph area displays the results from all four tests.
In the left panel, right-click and select Deselect All Tests from the
3
pop-up menu.
In the Legend panel, select the 1 check box next to the first test (as
4
shown in Figure 2-60
display only results from that test.
Quick Start Guide 2
Figure 2-58.
Figure 2-59.
on page 2-44) so that the Review Graph will
2-43