Agilent Technologies Nano Indenter G200 User Manual page 59

NOT E
Agilent Nano Indenter G200 User's Guide
Figure 2-53Click Run Batch to begin testing
You can abort a test at any time by clicking the red stop button directly
below the green arrow. You have the option of aborting a single test or
aborting an entire batch. Make your selection and then click the OK
button.
In the resulting Review Sample Names dialog box, you can modify
32
the Sample Name or leave the name as is. In either case, click OK to
continue.
In the Review the first test location of Sample dialog box, as shown
33
in Figure 2-54 on page 2-41, verify that the microscope is in the
correct location and then click OK to continue.
Quick Start Guide 2
2-40