Third Batch Test; Congratulations - Agilent Technologies Nano Indenter G200 User Manual

Third Batch Test

Congratulations!

Agilent Nano Indenter G200 User's Guide
While still on the Test page, reload the specifications for the first batch:
Right-click in the table on the right panel of the screen and select
1
Load Batch from the resulting pop-up menu.
In the Retrieve Batch File dialog box, select MyLDTBatch.bch and
2
click the Open button.
Initiate testing by clicking the green Go arrow.
3
Follow the on-screen prompts for naming the sample and selecting the
first test site. The instrument will now repeat the first batch that you ran.
You have finished the tutorial! Remember that when using the
instrument, you can:
• Define your own batch as you did in the first part of the tutorial.
This allows you to specify the test method, as well as when and
where the method is used.
• Use the default batch and default method as we did in the second
part of the tutorial.
• Reload and use a saved batch, as we did in the third part of the
tutorial.
Quick Start Guide 2
2-52