Agilent Technologies Nano Indenter G200 User Manual page 458

Agilent Nano Indenter G200 User's Guide
Double-click on the filename to open it in Adobe Acrobat.
3
Read the PDF file and then answer the following questions:
4
• What is the basic purpose of the method?
• What hardware is required?
• Are there any types of materials for which this method is not
appropriate?
From the Windows Start menu, launch NanoSuite.
5
In the User Login dialog box, select Agilent from the Name
6
drop-down menu.
Click OK.
7
If you are prompted to select a method in the Open Method dialog
8
box, click OK.
Select Open Method from the Method menu.
9
In the Open Method dialog box, select XP > XP Basic Hardness,
10
Modulus at a Depth from the Filename drop-down menu, as shown
in Figure G-9.
Click OK.
11
Figure G-9Open the XP Basic Hardness, Modulus at a Depth method
Choose Method > Edit Method > Configuration Items > Inputs as
12
shown in Figure G-10
Training Exercises G
on page G-11.
G-10