Agilent Technologies Nano Indenter G200 User Manual page 198

NOT E
Agilent Nano Indenter G200 User's Guide
Figure 4-119NanoSuite Configuration dialog box
Click OK.
8
Launch NanoSuite.
9
In simulation mode, NanoSuite cannot control any hardware. All
hardware control commands will be simulated.
To exit simulation mode:
Exit all instances of NanoSuite.
1
Choose Start from Windows.
2
Go to All Programs.
3
Choose Agilent NanoSuite > NanoConfig.
4
At the User Login prompt, select Agilent from the Name drop-down
5
menu.
Click OK.
6
In the NanoSuite Configuration dialog box, clear the Use
7
Simulation checkbox.
Click OK.
8
NanoSuite 4
4-106